Let's face it, power outages happen. And when they do, you'll be glad you have LED industrial emergency lights on your side. These lights are like your business's trusty backup buddy, ensuring you're never left in the dark.
For more information, please visit our website.
Here are five key features of LED power failure emergency lights:
1. Automatic Activation:
LED emergency lights typically feature an automatic activation system that turns on the light when a power failure is detected. This ensures immediate illumination in dark conditions.
Intelligent emergency battery backup
2. Energy Efficiency:
LED lights are known for their low power consumption compared to traditional incandescent or fluorescent lights. This means they can operate longer on battery power during an outage, providing extended emergency lighting.
energy saving round led high bay emergency lights
3. Long Lifespan:
LED technology offers a significantly longer lifespan than traditional bulbs, often lasting up to 25,000 hours or more. This reduces the need for frequent replacements and maintenance.
long lifespan of led high bay light battery backup
4. Brightness and Visibility:
Many LED emergency lights provide high lumen output, ensuring bright and effective illumination in emergency situations. This is crucial for safe navigation and evacuation.
high efficacy of led tubular light battery backup
5. Compact and Versatile Design:
LED emergency lights come in various designs, including wall-mounted, portable, and integrated into fixtures. This versatility allows for easy installation and use in different settings, such as homes, offices, and public spaces.
recessed mount led canopy lights battery backup for gas station
So, What Are You Waiting For?
Ditch those old, unreliable emergency lights and upgrade to LED industrial emergency lights today. They're the perfect way to keep your business safe and lit up, even when the power goes out.
Contact us at today to learn more about our LED power outage emergency lights and how they can benefit your business.
More review:
Emergency lighting is all around us&#;in our offices, leisure facilities and commercial properties.
The first emergency lights were just large incandescent spotlights mounted on top of lead-acid batteries (the type used to power cars) wired into the building&#;s circuitry. The units had transfer switches that flipped when the power went off, lighting up the spotlights&#;while the battery charge lasted.
These low power, unreliable options were quickly deemed subpar for providing suitable visibility during an emergency and the bright brains in lighting design put their heads together to come up with something better.
Emergency lighting design has come a long way over the past century and is now more advanced than ever. But what is emergency lighting? How does it work and where does it need to be installed?
Don&#;t panic if you don&#;t know, just look for the little green man above the door and read these FIVE things you should know about emergency lighting design.
Emergency lighting is installed to provide a suitable illuminating alternative when the mains power of a premises fails. There are plenty of components, from design to placement, that ensure emergency lighting can sufficiently handle the very task it was designed for: assisting during an emergency.
There are five types of emergency lighting and the different types are often confused. So let us shine a light on it for you.
This type of fitting is designed to work as a usual light fitting, being continuously lit and to be controlled alongside other lights in the area. If power fails, the maintained emergency fitting will operate at a lower light output level. This style of emergency lighting usually features in theatres, cinemas and shopping centres.
This type of fitting is usually switched off but if the mains powers fail, it will switch on automatically. The batteries are continuously charged. The most common style of lighting these are part of are is emergency exit signs. They are most often used in offices and factories where escape familiarity with the building is practised.
DALI stands for Digital Addressable Lighting Interface. It is a testing and control system that offers both flexibility and reliability. This system allows greater control and detailed monitoring and reporting of emergency lighting.
How? Because DALI lighting has the ability to communicate with its network. Devices that communicate with the same &#;technical language&#; can exchange information and DALI can &#;speak and listen to&#; multiple devices such as ballast, transformers and other lighting equipment.
Designed on a distributed intelligent framework, each DALI device has onboard memory that stores all relevant information about the device, including diagnostics.
This is where the battery power for emergency lighting is situated at one central point and fed to all relevant luminaires in the event of a power failure, whether they are maintained or non-maintained. All emergency luminaires will have a charge healthy LED indicator, which shows that the battery is being charged while there is a mains feed. When the power fails, the LED will switch off and the lamp will be illuminated by the battery.
This is where a lamp separate to the main lamp provides the emergency light source. The purpose here is to minimise any possibility of emergency lamp failure, as the &#;sustained&#; lamp is only used in emergency mode. This will only be relevant on a maintained emergency luminaire.
Emergency lighting is designed to ensure safe evacuation of a building, reduce panic and confusion and safely manage high-risk tasks in the event of a mains power failure. As a result, emergency lighting can be split into three sections: escape routes, open areas and high-risk task.
The lighting design in these specific specified areas improves the function and has purpose whether that&#;s to guide, direct or provide light to complete important tasks.
Emergency exits and escape routes should be provided with signs. They should be illuminated to indicate CLEARLY the route of escape to a point of safety. In compliance with The Health and Safety (Safety Signs and Signals) Regulations , Illuminated signs should be located at all final exits and also at locations where people may be uncertain about the route to safety.
Every change of direction leading to an escape door needs to be illuminated. An escape lighting luminaire should be placed near each exit door and anywhere where it is necessary to emphasize potential danger or safety equipment.
Qianyun Product Page
Escape route passages indicated by the green man and a directional arrow are created in line with BS designs. These arrows will need to point the way to the closest fire exit. Fire exit arrows for Left and Right are self-explanatory, but when do you use the up or down arrow?
The Up arrow is for when you have to continue along your route, towards another fire exit sign. It can also be used for final exits. Unless there is a step-down or ramp immediately outside.
The down arrow should be used when you have to continue along your route, towards another fire exit sign. If after an exit sign there is a staircase leading down immediately after your sign, then the down arrow is required.
Emergency luminaires should be stationed near the following:
Areas larger than 60m², open areas with an escape route passing through them, or hazards identified by the building risk assessment all require emergency lighting. These areas are usually offices, washrooms, receptions and conference suites.
The design of emergency lighting can also present personal necessary requirements for specific areas. For example, in a showroom that uses general focus LED downlights, emergency lighting should also be designed to mirror this if a power shortage or emergency happens.
In many emergency situations, workers or members of the public will just be able to stop what they&#;re doing, whether it&#;s using a computer, making a call or having a meeting, and evacuate the building.
However, some employees could be in the middle of a high-risk task such as working with machinery or dangerous substances. In these situations, the person involved must be able to see adequately to safely shut down the equipment.
Areas of high physical risk include plant control rooms and production lines. In these areas, there may not be a clear escape route and well-placed emergency lighting will be necessary for highlighting large obstacles or hazards.
Codes of practice and emergency lighting regulations state that at the location of any hazard a minimum of 10% of the normal light source must be supplied by emergency lighting with a minimum light level of 15 Lux.
When designing an emergency lighting system, make sure to take these areas into account as these workers will require more time during an emergency and the risk is higher.
Being aware of the regulations concerned with emergency lighting design will help you when it comes to choosing the correct design and placement for your fixtures. Emergency lighting regulations are important because the proper use of emergency lighting will determine the safety of individuals during an emergency.
Whereas &#;normal&#; everyday lighting does have a purpose and must be compliant with its own set of regulations, emergency lighting is also determined by how it assists people and improves difficult situations.
The following regulations are in accordance with BS :1- which is the Code of Practice for the emergency lighting of premises and BS EN : &#; a standard that specifies the guidelines for emergency escape lighting and standby lighting systems installed in premises or locations where such systems are required.
In the UK, the Fire Safety legislation requires emergency lighting to be provided in the following premises:
Illuminated Escape signs may be either externally illuminated or internally illuminated to ensure they are clear and legible. Externally illuminated signs should be illuminated 5 lux minimum on any part.
Both photoluminescent and self-adhesive or perspex signs must now be illuminated to 100 lux when the mains are in service.
The viewing distances specified in BS outline that signs should preferably be clearly visible, face on to where people will be looking, not on the ceiling or at an oblique angle.
Escape Routes (e.g. corridors, stairways etc) and exit (safety) signs, should maintain an illuminance of 1 Lux along the centre line.
Open Areas greater than 60m2 require anti-panic lighting with a minimum illuminance of 0.5 Lux.
High-Risk Task Areas which require a higher level of light but often for a shorter duration to make a dangerous machine, process or area safe. For high-risk task areas the illuminance should generally be 10% of the normal mains illuminance or at least 15 Lux &#; whichever is the greater and within a minimum response time of 0.5s.
The first priority is to establish the requirements for the particular installation, taking into account the building licensing requirements. It is important to undertake a site-specific risk assessment to ensure that all aspects of the requirements for emergency lighting within the building are catered for.
Emergency lighting assessments must be done in compliance with BS -1: which supports the building licensing requirements. All installations and the information outlined below must be part of the emergency lighting design process.
Risk assessments and considerations like the above will help to determine the design of the emergency lighting you need for your premises.
Our team of experienced lighting designers are always looking for ways that we can bring our clients&#; projects to life. We analyse the project from design to installation and ensure nothing is overlooked. We want to make the process easy and seamless for you and that means staying compliant with the regulations we&#;ve already mentioned.
Our lighting, most notably our amazing M-Line models, are illuminated down the full length of the fitting (up to 3 meters long in standard application).
We are more than happy to come visit you at your site to discuss your requirements and take a look for ourselves.
We also offer a lighting conversions service! This enables our clients to reduce lead times and offer standard products with emergency or dimming capabilities. The service is also great when existing luminaires on-site require adapting.
All you have to do is us with the product specifications and the work requirements and we&#;ll get straight back to you with a workable solution. Our conversions cover the following:
Don&#;t take a risk when it comes to making sure you&#;re prepared for an emergency. Our emergency luminaires are designed to be simple to install, stylish and discreet, making them a great addition to any premises. You can request a quote from us now.
Order your emergency lighting today by getting in touch with our amazing team on or simply
If you are looking for more details, kindly visit Emergency Lighting System.