When approaching your project, it is crucial to know the type of steel that is best suited for your needs. Different types of steel manufacturing can produce material that performs better for the specific applications. The hot and cold rolled steel manufacturing methods specifically have a great effect on the overall performance of the steel.
For more information, please visit hot rolled steel manufacturing process.
Prior knowledge of distinctions between the two methods can help your company save on time, raw material cost, and additional processing. This article aims to explain the differences between hot and cold rolled steel and discuss the advantages (and limitations) of each.
NOTE: Hot-rolling and cold-rolling should not be mistaken for different grades of steel. Steels of different grades can be produced as hot-rolled or cold-rolled.
Hot-rolling refers to a mill process in which you roll the steel at a temperature above its recrystallization temperature; a heat that typically exceeds 1000° F.
When steel is heated past its recrystallization point, it becomes more malleable and can be properly formed and shaped. It also allows for the ability to produce larger quantities of steel. The steel is then cooled at room temperature, which “normalizes” it, eliminating the worry for stresses in the material arising when quenching or work-hardening.
When the steel cools off, it will shrink non-uniformly, which gives slightly less control on the overall size and shape of a finished hot-rolled product.
Hot-rolled steel typically has a scaly surface finish. For situations in which the appearance of the material is a concern, the scales can be removed by several techniques: pickling, grinding, or sand-blasting.
These properties make hot-rolled steel most suitable for structural components and other applications where incredibly precise shapes and tolerances are of less importance, such as:
As you might suspect, the manufacturing process behind cold-rolled steel is a bit different. Despite the name, this process refers to steel that is pressed with the pressure of a roller at room temperature.
Compared to hot-rolled steel, cold-rolled steel has a nearly 20% increase in strength through the use of strain hardening. It’s through a series of breakdown, semi-finishing, sizing, semi-roughing, roughing, and finishing that cold-rolled steel shapes can be created.
Cold-rolling steel allows for the creation of very precise shapes. Since the process is performed at room temperature, the steel will not shrink as it cools, as it does in the hot-rolled process.
The exterior finish of cold-rolled steel is very desirable when aesthetics and visual appeal are a priority in your project.
However, the applications of cold-rolled steel are somewhat limited to a couple of shapes – square, round, flat, and variations thereof.
Typical uses for cold-rolled steel:
If you require large structural components, you will most likely need the hot-rolled steel process to create the parts. For smaller parts that require more precise and durable qualities, then the cold-rolled steel process is the way to go. If you have questions about which mill process you need for your project, feel free to call National Material at 847-806-7200 and ask for one of our skilled customer representatives.
When we are looking at steel goods, mechanisms or structures, we rarely think about how metal is made for them.
The company is the world’s best high carbon quality wire rod supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Like any other stage of steel production, the rolling process includes different methods to produce rolled steel.
Globally, rolled steel can be hot rolled and cold rolled. Hot-rolled steel is thought to account for up to 80% of global commercial production of rolled steel. We will talk about it.
Metallurgy starts from raw materials such as iron ore and coke. When it comes to conventional technology, they are used to produce iron at blast furnaces (BF). The iron is then used to make steel and semi-finished steel products such as slabs, blooms, round or square billets, and beam blanks. In some cases, this production excludes a BF process. For this purpose, electric arc furnaces (EAF) are used, where ferrous scrap and direct reduction iron (DRI) are used as feedstock.
Although many global producers sell slabs and square billets, these products cannot be used directly to manufacture cars, machinery, goods or steel structures. Semi-finished products should be further processed at rolling mills, where rolled steel of the target shape, geometry, and physical and mechanical properties is produced.
All semi-finished steel products undergo hot rolling first. It is carried out at hot-rolling mills where a semi-finished product is subject to plastic deformation by passing between two rolls, as a result of which its initial shape changes. That said, the material temperature shall be above the steel recrystallisation temperature.
Roughly speaking, it should be rather soft to be deformed by rolls, like the dough under a rolling pin. Furthermore, the metal is very hot – in most cases its temperature at the beginning of rolling is above 1,100°С and its finishing temperature is at least 900°С. This is why such rolled steel is called hot-rolled.
Hot-rolled steel is mainly produced at rolling mills consisting of stands. For example, hot-strip mills can consist of up to 15 "quarto" stands (i.e., each stand is complete with two pairs of rolls) and edgers to form the strip edges.
Hot-rolled plate production using slabs includes the following steps:
What are the advantages of hot rolling? If we wanted to process a cold steel slab into a flat product, we would hardly be able to succeed at it – such a slab is very hard, strong and thick even for specialised rolling equipment. Therefore, semi-finished products should be reheated first. Hot steel becomes plastic and easier to process. As a result, rolling mills help save time and efforts for the production of steel plates and strips.
In the CIS, finished hot-rolled plates are classified by:
The main advantage of hot-rolled steel is that it costs less than cold-rolled steel. Therefore, it is widely used in applications where less attention is paid to the surface quality and super high-dimensional accuracy, e.g., to make support steel structures for large construction projects or in the engineering industry. Metinvest Group is a large producer of hot-rolled steel. The Group's enterprises in Ukraine and Europe are complete with rolling equipment that is capable of producing the widest range of hot-rolled flat products. For example, the 3600 plate mill at Azovstal Iron and Steel Works andthe 3000 plate mill at Ilyich Iron and Steel Works of Mariupol. The mills in Italy and the UK produce plates for construction, shipbuilding, and pipemaking, while 1700 HSM at Ilyich Iron and Steel Works of Mariupol, 1680 mill at Zaporizhstal, and Steckel mill at Ferriera Valsider (Italy) produce steel coils. It should be noted that Metinvest Group invested US$110 million in the modernisation of the 1700 HSM at Ilyich Steel between 2018 and 2019.
To date, the typical hot-rolled flats production cycle involves reheating and rolling slabs. Strip-casting plants are becoming more commonly used by global steelmakers. In fact, this equipment combines steel casting and hot rolling into one production flow, omitting a semi-finished production stage. Such a technology makes it possible to achieve savings on utilities and to speed up the production process.
Although this technology is relatively young, Metinvest Group has been exploring the possibility of implementing it at one of its steel plants.
Contact us to discuss your requirements of coated steel plate. Our experienced sales team can help you identify the options that best suit your needs.