If you are looking for more details, kindly visit Zishen.
Shopping online has made finding iron fence and gate products not traditionally carried in stores much easier. Finding an iron fence or iron gate online is a good start, but how can you tell if it is a quality product? That part becomes a lot harder when all you have to go off of in a lot of cases is some photos and a few bullet points on a web page. Let&#;s take a deeper dive and go over what you need to look for when buying a quality wrought iron fence or gate.
ITEM #1 &#; RUST PROTECTION SPECIFICS
The number one concern most folks have about an iron fence is rusting. The problem is that a lot of companies throw out a few vague terms you don&#;t know and assume you won&#;t ask questions. Even worst, some sites don&#;t really specify what type (if any) rust protection they have. Galvanization is a time-honored and great way to protect iron and steel from rust. Lots of fence makers will utilize e-coatings to minimize rust. While they can be effective, it is a thinner coating. We prefer hot-dip galvanization for our parts because it encapsulates every surface of the piece inside and out.
Unlike spray-on rust prevention coatings that only cover exposed surfaces, hot dip galvanization coats the outside, inside and underside of the dipped pieces. The biggest problem with lower end spray coatings is that the pieces will often rot from the inside out and by the time you see it, the piece is already ruined. Look for specifics on how the pieces are treated to prevent rust. Our Stronghold Iron line utilizes a hot dip galvanization, a 4-stage chemical wash and then use a TGIC poly-based powder coating with UV fade inhibitors to protect our pieces.
ITEM #2 &#; HOW IS IT CONSTRUCTED?
The best construction method for iron fence is one that is strong and looks good from both sides. Below are a couple of photos showing how we build our Stronghold Iron fence with a punched rail and fully welded construction at the picket-to-rail intersection and for the decorative finial tip. You can see the picket (upright) goes through the middle of the punched rail for a strong connection and clean look from both sides of the fence:
Some steel and iron fence manufacturers will cut corners here. Especially in the rail-to-picket connection (the rail is the horizontal piece and the picket is the upright one). The worst ones we&#;ve seen is companies using rivets or screws to connect the pickets to the rails. While this works fine on a lighter aluminum fence, it does not work as well on an iron or steel fence. Not only does a weaker connection result in a &#;loose&#; feeling panel, but the rivets can allow movement which can scratch down to bare metal and create rust spots.
Another construction shortcut we see is called &#;layover&#; or &#;railroad&#; construction of pieces. This is where a horizontal rail is laid out and the pickets are welded to the face/ back of the rail. This is not only a weaker way to build the fence that can allow for easier bending of the horizontal rail, but it only looks ok from one side as well. It also looks non-symmetrical and bit unbalanced. Here is an image of a competitor&#;s piece built in layover style:
ITEM #3 &#; FENCE AND GATE HARDWARE
This may seem like a small and unimportant item, but shortcuts here can make a nice iron fence or gate look cheap. Pay attention to the smaller elements like the brackets that connect the iron fence to the posts, the post caps and decorative finials on top of the pickets.
For me, fence brackets is a big one. Nothing makes a nice steel or iron fence go from nice looking to cheap than stamped steel fence brackets. These are made of thin stamped steel and wrap around the fence post to hold the panel up. Below is an image of a competitor&#;s stamped steel, collar style fence bracket:
Not the greatest pic, but its tough to find one since the hardware isn&#;t often shown in detail. These often leave a gap between the rail and post, are tough to get straight, give it a cheaper modular look and draw your eye to them in a not-good way. Counter to that, our Stronghold Iron uses a stronger and cleaner looking cast-iron solid bracket that mounts inline of the fence post. This tucks the hardware and keeps it off the face of the fence line. This gives the look of a more authentic iron fence that was often welded together 100+ years ago. Here are some photos of our standard iron fence bracket:
Post caps are another place where cost cuts can be made. Lots of manufacturers will use a stamped steel standard cap which is easier to produce and squish on the top of the post. For the more decorative ball style post caps, some will make them out of aluminum, or worse, plastic. Our Stronghold Iron fence line uses cast iron caps for both styles that you can see in the photos below. The cast iron gives it a nice textured and authentic appearance.
Another place that is tough to tell the quality of the hardware online is those decorative tips on top of the picket called finials. Many places charge a hefty upgrade fee per panel to add finials to the fence panel. The worst part is these are often cheap die-cast, aluminum or plastic that ship loose and you have to glue or press them on. The difference between the fence panel material and finial material will be come apparent over time when the dissimilar metal coatings (or materials like plastic) fade at a different rate and really start to look like a cheap add-on. Be sure to check what those finial tips are made from and how they are attached. Our Stronghold Iron uses solid cast-iron finial tips that are welded directly to the picket like the image below.
Gate construction is a big one to watch out for too. Unlike a fence panel that is fixed in place and does not move, the gates need to be able to support the weight of the entire leaf as well as any leverage force pressures exerted on them. This is where a proper gate frame comes into play. Many companies will simply weld two posts to the end of a fence section and call it a gate. Functional, but not really all that strong. You will sometimes see cross-bracing on wider gates as a band-aid to poor construction as well. The correct way to make a gate is with a fully boxed and welded gate frame like our Stronghold Iron line. That makes a solid, 3-sided frame that will withstand way more pressure and weight without cracking or deforming. Here is an image showing the U-frame on one of our gates.
Even little items like the screws and bolts used can be something that makes installation a pain or detracts from the look of the fence. Make sure the hardware is color matched to your pieces and uses a stronger hex-head on the bolts that allow use of a socket. Phillips head style screws can often strip easily and make installation a pain.
Contact us to discuss your requirements of metal security fence. Our experienced sales team can help you identify the options that best suit your needs.
ITEM #4 &#; REAL WORLD IMAGES AND EXAMPLES
Most sites are going to put their best foot forward with the photos on their site. These images have been professionally lit and photoshopped to make the fence look perfect. It gives an idea on the fence&#;s appearance but doesn&#;t give a very real world view on how the fence looks installed. Look for a photo gallery of installed jobs on the website to get a better feel how the fence is going to look in the real world. On ironfenceshop.com, I would say 98% of our images in our photo gallery are from homeowner and contractor installations in the real world.
Use these real world pictures to look for examples of the same fence or installation area you are going to be using or your project. How does it look as a whole? Any close-ups of the fence in more detail? Does the fence look weird from certain angles? Things like that. In this day and age, any company worth its salt should have lots of photos and videos showing their products and components. If you can&#;t find it on the site, is the company responsive to or requests on what you are looking for? You would be surprised how many people are shocked when we actually pick up the , answer questions or get back to emails right away.
ITEM #5 &#; ACCESS TO SPECS
This one isn&#;t as exciting or as fun as looking at completed fence project photos, but its probably the most important and overlooked item that can make the difference between being an informed shopper and regretting your purchase. Cutting corners on component sizes, thicknesses and finishes is a time honored tradition of lower-end companies that try to undercut higher quality pieces with a lower price. Don&#;t get me wrong. Price is important, but if you are saving $20 and getting a piece that is half the thickness, weight and will rust in 3 years; are you really getting a good deal? Any fence and gate maker worth their salt will have the ability to provide you specifications (specs) on the pieces you are buying. You can find and download both our abbreviated &#;quick specs&#; and our full specs on our specifications page on ironfenceshop.com. Look for something fully versed and thought out like our specs versus some simple bullet points or a short blurb on a web page.
ITEM #6 &#; WARRANTY INFORMATION
Just like the specs above, you want more than text on a web page about the warranty. While downloading a warranty is a good start (you can find and download ours here), you also want to be able to ask and get good answers on how that warranty is applied. You should be able to talk to someone at the company and ask how warranty claims are handled and what is involved. Just seeing a stated warranty period is not enough to fall back on. Be wary of certain things that can void your warranty (like installing by salt water) or stipulations on what&#;s covered and what is not (especially on &#;Lifetime&#; warranties).
ITEM #7 &#; THE COMPANY YOU ARE BUYING FROM
Some folks may feel like this is counter-intuitive coming from a company that sells online like we do. However, its more important than ever when dealing with an online sale. Is the company accredited from a source like the Better Business Bureau (BBB) that can give you a good view on customer happiness? We&#;ve been a long-standing A+ member of the BBB for over 10 years now. If you have a problem with your fence or its delivery, do you have direct access to someone at the company? If you bought your fence through a shopping cart online with no human interaction, good luck getting any issues resolved on that without lots of tag and emails.
If you the company, how quickly do they get back to you? Same goes with a call. If you emailed or called and have not heard anything back the same or next day when they are trying to earn your business, how receptive do you think they will be after they have your money? A place where you can get a direct extension and name is going to be much more helpful and receptive than a place with a generic and no direct people to work with.
&#;&#;&#;&#;&#;&#;&#;&#;-
I hope these 7 items give you better understanding on what to look for when buying a wrought iron fence. If I can help with any questions or concerns you have, please don&#;t hesitate to give us a call at 800-261- or shot us an at [ protected].
If you&#;re considering installing a new fence, no doubt you have already asked yourself plenty of questions. After all, even a low-cost new fence is a considerable investment in your home and not something you would do without careful consideration. But while you may have thought through your decision, you may have overlooked some questions, too. To make sure you know all you need to know going into a fence installation, here are seven excellent questions to ask before installing a new fence. Once you have a clear answer to all of these questions, you will be in the perfect position to find your fence company and start building.
You know you want a new fence. But do you really know why? Obviously, something has gotten you thinking about it, but clearly, laying out all the expected functions of your new fence is an important exercise. There are several reasons people install fences, and each one comes with its own set of considerations.
For many homeowers, a good fence is the best way to keep out prying eyes and unwanted views. A privacy fence is a solid fence with little or no gaps and is usually at least six-feet high. It can block others from seeing into your property, but it can also block unwanted views from your property. For instance, if your home backs up onto a busy road or some other undesirable view, a privacy fence can make your yard feel a little more secluded. A solid privacy fence can also block out some noise.
Curb appeal is the first impression you get of a home as you approach it from the street or curb. It relies solely on the home&#;s external appearance, so no matter how lovely the inside is if the curb appeal stinks, that first impression can be hard to shake. If you plan on selling your home, increasing your curb appeal is of paramount importance. If you don&#;t have any plans to sell, you may still want to improve curb appeal just to make your home look great. Whatever your reason, if your goal is to increase curb appeal, you have to consider what a fence will look like from the street. It should be made of high-quality materials and match the style of your home.
For some homeowners, a well-constructed fence is a security measure. Installing a new security fence keeps intruders as far from your home as possible. And even the appearance of a security fence is often enough to discourage the average criminal from attempting a break-in. Most criminals go for easy targets, and a home with a security fence is not so easy to get into. If your fence is there to provide security, you need to consider the strength and durability of your fencing material, as well as its placement, gates, and latches.
Both pets and young children often have a mind of their own when it comes to wandering off. If you want to spend playtime in your yard but don&#;t want to spend your time corralling children and pets, a fence is a great way to keep everyone contained. For children, most privacy fences will suffice. For pets, you may need to consider their size, strength, and abilities when selecting a fence. Here&#;s a handy guide to choosing the right fence for your dog.
One of the oldest reasons for fence building is to mark the boundary of your property. A boundary fence may pull double duty, also supplying privacy, security, and other benefits. But it also comes with its unique needs. Specifically, if you plan to place a fence around the boundary of your property, you need to obtain a survey that clearly marks your property line. The documents are usually available from your local county assessor&#;s office. Make sure you share those documents with your contractor before they begin. You also may need to talk to your neighbors since a fence built right on your property line is actually shared property with your neighbor.
Pool fences are unique because they are installed inside your property instead of around it. A pool fence is a critical safety tool, and many state and local governments require them. There are usually laws that govern the details of a pool fence, so you need to make sure your contractor knows them and follows them. Otherwise, you could find yourself tearing it down and starting over.
It might seem like you should make other decisions first, like which material you want or what you want your fence to look like. But starting with your budget ensures that you don&#;t get stuck on a fence you can&#;t afford. On the other hand, it also prevents you from underspending. Saving money is great, but if you have the cash budgeted, there may be additional features that you hadn&#;t considered.
Of course, deciding a budget goes hand in hand with determining the purpose of your fence. There is a very wide variety of fence types and materials with drastically different costs. So if you don&#;t know where to start with budgeting, you can begin by considering the minimum cost for the type of fence you want. If you can&#;t afford it, you&#;ll need to make other plans. Of course, never let the price discourage you completely. You never know what kind of deals are out there. Whatever type of fence you are trying to budget for, Bravo Fence Company can help with a free, no-obligation estimate. We also provide financing options.
Once you know what you want your fence to do and how much you have to spend, you can start thinking realistically about what material you want.
Wood is a traditional and versatile fencing material. Some popular and very different types of wood fences are short decorative picket fences, taller privacy fences, and rustic split-rail fences. When you choose to build with wood, it is important to think about maintenance. As a natural material, wood is subject to weathering, infestation, and rot if it is not well-maintained. The type of wood and finish you use can affect how you maintain your fence, too.
A steel or aluminum fence can imitate the look of traditional wrought iron, or it can provide a sleek, modern style. Whichever style you choose, metal fences are elegant and strong. For added security, steel is stronger than aluminum, but aluminum tends to require less maintenance. Many metal fences are incorporated as half fences on top of a hardscaped while such as brick. Metal is a great material for a fence that will increase curb appeal. The thin, widely-spaced pickets allow you to see the home and its landscaping while providing an upscale touch of design.
Chain link fences have gotten a bad rap due to their use as commercial and industrial security fencing. But a modern chain link makes a great residential fence, too. Chain link comes in different sizes, and chain-link coated in vinyl provides a softer look, more color options, and added durability. Chain link is relatively inexpensive, so it&#;s a good choice for installing a new fence on large properties where the cost per foot can really start to add up. Chain-link can also be dressed up with hedges or privacy slats.
Vinyl is the lazy person&#;s ideal fence material. It&#;s a little more expensive than wood, but it requires almost no maintenance. It is not an organic material, so it won&#;t rust or rot, and it is impervious to insects. The color is baked into the material itself, so scratches hardly show. And it stands up well to almost any weather. The most common maintenance for a vinyl fence is just an occasional cleaning with a garden hose or pressure washer to clean off dirt and pollen. Vinyl can mimic the look of any type of wood fence, from ornamental pickets to solid privacy fences.
The height of your fence will be based mostly on its purpose. A privacy fence needs to be tall enough that people can&#;t see in. Typical privacy fences are six feet tall, but they can stretch up to eight feet. Ornamental fences can be as short as four or even three feet. One consideration when choosing a fence height is whether there are any local regulations about it. Some homeowners associations or municipalities limit fence height, which you need to know before you start installing.
No matter where you live, there is a good chance that your jurisdiction has something to say about fences. County and city governments sometimes regulate where you place a fence and how tall it can be. Homeowners associations can be even more specific, getting into the nitty-gritty of fence styles and other design features. At the very least, your contractor may need to contact the local utilities before digging to learn about any buried pipes or wires. Make sure you have researched all the applicable rules and regulations in the planning stages, or you could risk fines or even have to remove your brand-new fence.
They say good fences make good neighbors. It&#;s a cliche, but it&#;s true. If you plan on installing a new fence along the edge of your property or anywhere your neighbors can see it, you may want to give them a heads-up about your plans. While you have no obligation to them (assuming the fence is entirely on your property), giving them advance notice can help prevent disputes and contention down the road.
If you plan on installing a new fence along the boundary of your property, you absolutely must consult with your neighbor. Many local law codes stipulate that a boundary fence is shared property. Your neighbor has certain rights. And if you let them know ahead of time, they may also be willing to share some of the cost of the new fence.
Planning a new fence can be exciting, but before you dive in, consider whether you really need a whole new fence. Sometimes an existing fence can be repaired. Of course, as fences age and break down, a replacement becomes more cost-effective than a repair. But just in case, check out our guide about everything you need to know about fence repair.
Now that you&#;ve asked yourself the seven heavy-hitting questions about installing a new fence, you&#;re ready to get started! If you want a smooth, affordable experience, trust the pros at Bravo Fence Company to design and install your new fence. Reach out for a free estimate today!
For more information, please visit metal gate for backyard.