The Gripple system for suspending pipework has been specifically designed to simplify the installation process, reduce the number of components required, reduce waste on-site and deliver all the required versatility to suit a range of different installation requirements. A smarter way of installing mechanical services, Gripple solutions are designed with simplicity in mind and reinforced by a level of support which puts our technical specialists right at the heart of your project.
For more information, please visit our website.
Gripple pipe clamps deliver universal solutions which replace more than 13 different pipe ring sizes, and significantly reduce your component count. When utilising our installation design services, our solutions are delivered in compact cardboard boxes, labelled by zone, colour-coded and corresponding with installation drawings, ensuring tidy on-site storage and a vastly simplified installation process.
Constant spring hangers are designed so that they can be installed by an average field worker with little to no difficulty. Placing the hangers in position and adjusting them to carry the desired load at the desired position is easily accomplished. All suspension style constant hangers are designed so that the top connection can be removed in the field and can be bolted or welded separately to the supporting structure or suspended from rods. The hanger frame and casing can then be easily attached by reinserting the removable pin or pins.
If you want to learn more, please visit our website zhiang.
All constant effort hangers have upper and lower stops to limit travel. Hangers with downward travel (pipe moves downward from installed to operating) will be locked (pinned) in the installed position in order to handle the hydrostatic test loading. Hangers with upward travel (pipe moves upward from installed to operating) will be locked (pinned) in the installed position which eliminates the necessity of pulling the hanger to the bottom of the travel when connecting the load rod in the field. All hydrostatic tests should be performed with the constant locked in the installed position. If desired, constant spring hangers can be supplied locked at any desired point in the total travel range. In all cases, the lock pin can easily be removed by hand by adjusting the turnbuckle on the load carrying rod until the pin is loose. This lock must be removed at the final adjustment or the hanger will not function.
After the hydrostatic test is performed, the final adjustment should consist of turning the turnbuckle so that the hanger is not resting on the travel stop in the installed position. An inspection should be made after the system is in service to insure that the travel indicator is located at the operating position on the travel scale.
When the supported piping system is required to be re-hydro tested after start-up, all constant effort hangers should be re-pinned in the installed position. All hangers should be adjusted, by the turnbuckle, until the pin holes are aligned and the pin can be re-inserted. In a piping system where &#;cold spring&#; must be utilized to align a piping system or to pre-stress it, planning ahead is encouraged so that the line can be supported before, during and after the cold spring exercise by adjusting the turnbuckle within its limits.
The company is the world’s best spring hangers for pipe supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.