The cracking equipment uses micro-pressure pyrolysis technology to separate and reorganize the components in the waste into fuel oil and carbon black, making the most of waste to regenerate new energy.
1. Environmental protection: The design of pyrolysis equipment is very environmentally friendly because they can convert waste rubber plastics into useful products without releasing harmful by-products. This process helps to reduce landfill and greenhouse gas emissions, thereby minimizing the negative impact on the environment. In the recycling of waste tires, plastics, and sludge, high-temperature pyrolysis is a closed-loop recycling of waste raw materials, with a simple process and low pollution. The various products produced by the pyrolysis process make up for the energy demand and reduce the pressure of waste on the environment; after high-temperature anaerobic pyrolysis of waste tire pyrolysis equipment, the macromolecules in waste tire rubber can be converted into small molecules, which can be restored to petroleum components. These petroleum gas components are then cooled by the condensation system and recycled to obtain waste tire pyrolysis oil, realizing the resource utilization of waste tires. Waste plastic pyrolysis refining equipment also has a series of advantages. First of all, it can efficiently process various types of waste plastics, including polyethylene, polypropylene, polyvinyl chloride, etc., with an oil yield of up to 95%. Compared with landfill or direct combustion, the pyrolysis of waste plastics is much less polluting to the environment. It is currently recognized by academia and industry as an environmentally friendly way to recycle and treat waste plastics, which can greatly solve the pollution problems caused by waste plastics.
2. Produce renewable energy: One of the main advantages of pyrolysis equipment is the ability to produce renewable energy such as pyrolysis oil, carbon black and combustible gas. These products can be used as alternative energy sources, reduce dependence on traditional fossil fuels, and promote sustainable development. Taking the pyrolysis technology of waste tires as an example, the pyrolysis process generates 37% carbon black, 45% fuel oil, 13% steel wire and 15% combustible gas, and the entire production process does not produce waste water, waste gas and waste residue, which is safe, environmentally friendly and energy-saving. Waste plastics, including polyethylene, polypropylene, polyvinyl chloride, etc., can have an oil yield of up to 95%. Secondly, the equipment can not only convert waste plastics into valuable energy products, but also reduce dependence on traditional oil resources. The calorific value of pyrolysis oil can be as high as 10600kcal, which can be used as fuel in large cement plants, boiler plants, steel plants, etc. Carbon black can directly replace coal for briquetting or finely ground into powder to make rubber products again.
3. High efficiency and low consumption: Pyrolysis equipment is known for its high efficiency and low energy consumption. The electricity consumption per hour is less than 20kw/h.