1.1 This specification covers two types and two grades of seven-wire, uncoated steel strand for use prestressed concrete construction. The two types of strand are low-relaxation and stress-relieved (normal-relaxation). Low-relaxation strand is to be regarded as the standard type. Stress-relieved (normal-relaxation) strand will not be furnished unless specifically ordered. Grade 250 [] and Grade 270 [] have minimum tensile strengths of 250 ksi [ MPa] and 270 ksi [ MPa], respectively, based on the nominal area of the strand.
HUAYONGXIN Product Page
1.2 A supplementary requirement (S1) is provided for use where bond strength testing of 0.600-in. [15.24-mm] diameter Grade 270 [] strand for applications in prestressed ground anchors is required by the purchaser. The supplementary requirement applies only when specified in the purchase order.
1.3 This specification is applicable for orders in either inch-pound units (as Specification A416) or in SI units (as Specification A416M).
For more information, please visit astm a416/a416m.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification.
This standard is referenced in the International Building Code®.
Copyright © Tianjin Huayongxin Prestressed Steel Wire Co., Ltd. All Rights Reserved. | Sitemap | Sitemap | Technical Support: REANOD
Contact us to discuss your requirements of Prestressed Steel Strand. Our experienced sales team can help you identify the options that best suit your needs.