DOFO GROUP LIMITED Product Page
### Step 1: Gather materials.
First, gather all the materials you will need for your DIY 15W solar panel fabrication project. This includes solar cells, soldering iron, flux pen, tabbing wire, bus wire, a soldering station, safety goggles, and a workbench.
### Step 2: Prepare the solar cells.
Carefully unpack the solar cells and organize them on a clean work surface. Make sure they are all facing the same direction and that the front side is facing up. .
### Step 3: Tabbing wire.
Cut the tabbing wire into the appropriate lengths for your solar cells. Use the flux pen to apply flux to the front of each cell. Place the tabbing wire on top of the cell and use the soldering iron to attach them together.
### Step 4: Connect the solar cells.
Once all the solar cells have tabbing wire attached, connect them in series by soldering bus wire from the front of one cell to the back of the next. Continue this process until all the cells are connected in one long string.
### Step 5: Add a diode.
To prevent reverse current flow, solder a diode onto the last solar cell in the series. Make sure the diode is facing the correct direction to allow current to flow in only one direction.
### Step 6: Test the connections.
Before encapsulating the solar panel, test the connections with a multimeter to ensure everything is properly soldered and connected. This will help prevent any issues with the panel once it is sealed.
### Step 7: Encapsulate the panel.
Once you have confirmed all connections are secure, encapsulate the solar panel with a clear protective layer. This can be done using a clear epoxy resin or plexiglass sheet to protect the cells from the elements.
### Step 8: Install your solar panel.
Finally, install your DIY 15W solar panel in a location where it will receive ample sunlight. Connect it to a charge controller and battery to start harnessing clean, renewable energy for your home.
By following these step-by-step instructions, you can fabricate your own 15W solar panel and start enjoying the benefits of clean energy in no time.
You can find more information on our web, so please take a look.
The company is the world’s best 15w solar panel fabrication supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.