At WL Plastics, we manufacture high-density polyethylene (HDPE) piping in sizes ranging from ¾&#; to 54&#; diameters. Depending on the application and required specifications, or HDPE pipes come in IPS, CTS, DIPS, and SIDR sizes.
Valor Pipe Product Page
We carry a range of pipe sizes to suit various applications. The following resources are helpful when selecting the right pipe size for a specific application:
&#; WL 102: This size chart lists the IPS (Iron Pipe Size) pipe sizes and pressure class ratings for our HDPE pipe with IPS sizes ranging from ¾&#; to 54&#;.
&#; WL 104: This size chart lists the DIPS (Ductile Iron Pipe Size) and DIOD (Ductile Iron Outside Diameter) pipe sizes and pressure class ratings for our PE pipe. The chart includes DIPS sizes ranging from 4 to 36.
&#; WL 116: This PDF provides helpful information about WL Plastics pipe standards. It includes tables with outer diameter (OD) size and dimension ratio (DR) for piping in various industries.
&#; WL 129: This document provides IPS and CTS (Copper Tubing Size) sizes for gas distribution piping per ASTM D.
&#; WL 130: This resource provides IPS and DIPS pipe sizes for Class 200, 250, and 335 PE FM Approved Pipe, including IPS sizes ranging from 2 to 36 and DIPS sizes ranging from 4 to 36.
If you are looking for more details, kindly visit 36 Inch HDPE Pipe.
Polyethylene pipes of Pars Ethylene Kish , in the size 36 inch (nominal outer diameter) are manufactured with the best PE 100 materials as in lines (these lines are 12 meters long in default) according to the standard table of Inso .
36 inch polyethylene pipe is used for the main lines and branches, water division and transferring, urban facilities and fluids transfer and in order for pipes&#; connections to each other and all kinds of junctions, butt fusion welding method or electrofusion jointing is exploited.
Application of these 36 inch polyethylene pipes: water transfer, various firefighting systems, sea water transfer, allowable fluids transfer systems under pressure.
The junction method exploited for polyethylene pipes which are used in irrigation and agriculture specific watering is usually via screw connection which of course, the butt fusion method could be used as well.
Pars Ethylene Kish polyethylene pipes are manufactured with modern German technology using the state of the art machinery of the world. About the countless advantages of these polyethylene pipes, the following could be stated:
Remark: Polyethylene pipes in the work pressures of 10, 12.5, 16 are produced in coils and for other work pressures, they are produced and presented as in 20 meter coils (e.g. polyethylene pip with size 12 and 10 bar pressure in coils and the same polyethylene pipe with pressure 20 will be produced in 12 meter lines)
Using polyethylene pipes in coils will reduce the jointing costs and installation and operation time.
Want more information on 18 Inch HDPE Pipe? Feel free to contact us.