Factory Manufacture Insect Screen Mesh Whole Process, Wholesale Anti Mosquito Insect Mesh

Table of Contents

Today, we will show you our mesh factory. The insect screen mesh is mainly used in screen door and window screen. The article will explain the production process of insect-proof yarn in detail

If you are looking for more details, kindly visit huili.

First of all, the raw materials need to be prepared before production, and the anti-mosquito mesh is usually made of polyester fiber, glass fiber or other synthetic fibers

1. Wire drawing process, through the process of spinning and drawing the raw material into fiber. These threads can have different thicknesses and fiber structures, which can be adjusted as needed 2. Weave or weave the fiber into a network structure, this step can be completed by mechanical weaving or weaving machines, according to the design needs to make different densities, sizes and shapes of the mesh 3. Stereotyping and dyeing, weaving of anti-mosquito mesh require some post-treatment and processing technology, such as stereotyping, dyeing or coating treatment, to enhance its anti-insect, waterproof or durable performance 4. Cut the required size, after the completion of the mesh structure, the anti-mosquito mesh will be cut according to the specific size requirements, and then finish and trim the edges to make it meet the specifications of the final product 5. Quality inspection, after the mosquito screen is made, the quality inspection will be carried out to ensure that the product meets the relevant standards and requirements. This may involve checking mesh size, strength, uniformity, and whether it has the desired functional properties

6. Packaging, the last step is to package the anti-mosquito gauze, which is usually packaged according to customer orders or sales requirements, and then waiting to be distributed to sellers or end users

The above is the whole production process of the anti-insect mesh.

Table of Contents

 

Fiberglass alkali-resistant mesh

Product Description

Fiberglass alkali-resistant mesh is on the basis of C-glass or E-glass fiberglass woven fabric, then coated with alkali-resistant liquid. It possesses properties of high strength, good cohesion, and anti-alkali. Thus, fiberglass mesh is the ideal construction material for EIFS (exterior insulation and finish system), widely used for wall reinforcement, roof waterproofing. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic, etc. It is also known as soft steel bar.

Fiberglass mesh is a neatly woven, crisscross pattern of fiberglass thread that is used to create new products such as tape and filters. When it is used as a filter, it is not uncommon for the manufacturer to spray a PVC coating to make it stronger and last longer. The most common place to find fiberglass mesh is in tape products.

Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before having to apply the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape, and the wall.  

Product Parameters

Specification

Contact us to discuss your requirements of Fiber Mosquito Screen Wholesale. Our experienced sales team can help you identify the options that best suit your needs.

 

Characteristic

1. High tensile strength

2. Alkali resistant

3. Good cohesion

4. Can firmly combine with EPS board
   

Application

1. Fiberglass mesh is used for wall reinforcement.
2. Fiberglass mesh is an ideal material for exterior wall heat insulation.
3. Fiberglass mesh can be applied to bitumen as roof waterproofing material, so as to strengthen the tensile strength and extend life time of bitumen.
4. For Reinforcement of marble, mosaic, stone, and gypsum board.

 

Packaging & Shipping

Shrink film, then in cartons.

Fiberglass AGM mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL,  etc.

Our Advantages

Nanjing EFG CO., LTD. has delivered this product to USA, EU, Middle East, North Africa, South Africa, Asian customers with ensured quality and rich experience for export deliveiry.  

Nanjing EFG CO., LTD welcomes cooperation from all of the world.

Production Facilities



Test Instruments And Devices

Company Profile

FAQ

Want more information on Honeycomb Blinds in China? Feel free to contact us.