Inconel® 600 is a nickel-base alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy has long been used in the heat treating industry for many of the same applications as RA330®. 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
Contact us to discuss your requirements of nickel alloy 601 pipe and tubing wholesale. Our experienced sales team can help you identify the options that best suit your needs.
Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic. However, when sulfur compounds are present as well, or for ammonium hydroxide service, 600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies. To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use. A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Alloy 600 is popular engineering material for applications where resistance to both heat and corrosion is required.
The excellent mechanical properties of the alloy give this material high strength and good workability. Corrosion resistance is good, especially in alkaline environments, and can be used in both cryogenic and elevated temperature service.
If you are looking for more details, kindly visit monel tubing.
Alloy 600 is resistant to a wide range of corrosives. The alloy provides excellent resistance to alkaline solutions and fair resistance to strongly oxidised acid solutions. It is particularly resistant to attack by dry chlorine or hydrogen chloride, even at temperatures up to 650°C.
Commercial applications for this engineering material include:
We stock Alloy 600 in round bar, plate, sheet, wire and round tube.
Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical topic. Smiths Metal Centres Limited also boasts an in-house UKAS Accredited Testing Laboratory which is unique within the multi-metal and plastic stockholding sector. We believe this underlines our total commitment to quality and our ethos of being the complete service provider.
For more information, please visit s32750 super duplex.