5 Signs You Should Invest in FRP Grating

30 Dec.,2024

 

5 Signs You Should Invest in FRP Grating

When replacing something as common as grating, it is natural to go with the same material you have always used.  It has worked in the past, so why would you change your preference now?

With competitive price and timely delivery, Shengfei sincerely hope to be your supplier and partner.

Fiberglass Reinforced Plastic (FRP) grating is a great alternative to steel grating.  It will solve problems and save money on major issues that you may not have even known were avoidable.  Here are some things to take into consideration with grating:

 1 - Steel grating prices are on the rise

  • With steel prices increasing, it does not make sense to spend so much money on a product that will corrode and have to be replaced in a potentially short amount of time.

2 - Your steel grating is corroded

  • So, your steel grating is corroded, and it is time to replace it. Why would you replace it with a product that will just corrode again?  Steel is extremely corrosive and dealing with corrosion is very costly when you factor in maintenance and replacement costs. Take this opportunity to replace that corroded steel grating with FRP grating.

3 - Your steel grating is slippery

  • Due to corrosion as well as other conditional factors, metal can become very slippery. FRP grating has superior slip resistance.  In fact, there are various types of slip resistant surfaces you can choose from depending on your need.

4 - You cannot afford the installation of steel grating

  • In addition to the rising price of steel grating, the installation of steel grating is much more expensive than the installation of FRP grating. For more information on the comparison of installation costs of FRP versus steel grating, click here

5 - You do not like to spend valuable time and money on maintenance

  • In order to prolong the life of metal grating, you must conduct regular maintenance.  This maintenance will cost you in many ways.  Not only are the materials costly, it will cost you to hire someone to do this maintenance, and you will have cost associated with downtime - all cost which you should avoid.

As you can see, given the choice between FRP grating and steel grating, FRP grating is the obvious choice.  While the initial investment may be a little more, the cost savings in the long run are incomparable.

DURAGRID FRP Grating Offering a more Economical ...

High commodity scrap prices for steel in had made a national retailer a theft target. The problem was the stealing of steel grating at the drainage systems in the large retail chain&#;s loading zones. Replacement costs of steel grating were very high due to longer fabrication times and higher steel prices. Another problem was aesthetic deterioration caused by the varying age of the steel grating and water runoff. The retail chain used wood as a temporary solution, but it became rotten in due course due to its nature.

Solution

The retail chain&#;s objective was to employ more number of non-metallic structural products in the drainage system to prevent trash and water buildup as well as theft. The chosen solution was DURAGRID pultruded grating from Strongwell.

If you are looking for more details, kindly visit pultruded fiberglass grating.

DURAGRID 1.5" HD- pultruded grating was used in eight installations to get extended years of maintenance-free service. FRP's light weight, high strength, easy-to-install characteristics enabled the retail chain to access its loading docks during installation, thus reducing downtime.

Since there is no decline in steel prices, the heavy duty HD grating will serve as a permanent, corrosion-free fixture in the loading zone of the retail chain while facilitating full drainage capabilities for the coming years.

Technical Data

Product : Heavy Duty Drainage Covers Materials : DURAGRID fiberglass reinforced grating Sizes : DURAGRID HD- 1.5" grating Process : Pultrusion For : McNichols Company User : A global discount retail chain

About Strongwell

Strongwell Corporation is involved in the design, fabrication and testing of molded or pultruded fiber reinforced polymer composite products for construction, commercial and industrial applications.

Strongwell has been pultruding fiber reinforced polymer composite structural products since . Today, with more than 65 pultrusion machines and 647,000 square feet of manufacturing space in three plant locations, Strongwell has unequaled capacity, versatility and flexibility to meet the needs of its customers and allied partners. All Strongwell pultruded products are made in the USA. Click here to learn how Strongwell&#;s pultruded products out perform traditional materials.

The company is financially strong, quality oriented, technically advanced, and customer focused. Strongwell's customers include Fortune 500 industrial and commercial firms, major architectural and engineering firms, leading contractors and distributors, and many other companies - both large and small - in a variety of markets.

This information has been sourced, reviewed and adapted from materials provided by Strongwell Corporation.

For more information on this source, please visit Strongwell Corporation.

Contact us to discuss your requirements of fiberglass floor grating. Our experienced sales team can help you identify the options that best suit your needs.