What are some of the areas where coupling shafts are used?

Updated May 2019 || As outlined in our coverage of couplings for motion control — here at this couplingtips.com article — couplings connect rotating shafts powered by a drive of some type — often an electric motor.

For more custom pu couplinginformation, please contact us. We will provide professional answers.

All couplings serve to transmit drive torque and angular velocity. But applications for motion control (such as axes to position loads) usually use disc, slit or beam, curved-jaw, bellows, and other zero-backlash couplings capable of precise transmission of torque.

In contrast, applications for power transmission (as in grinding machines, pumps, and material-handling machinery) commonly include disc, gear, chain, elastomer tire, grid, jaw, and Oldham couplings. Such PT couplings transmit more torque on average than couplings designed for motion control … even to millions of lb-in. Plus they’re more rugged to withstand challenging environments.

Chain couplings — with typical maximum torques to 220,000 lb-in. at their largest — wrap lengths of chain around sprockets with clearances to impart flexibility.

These power-transmission couplings excel in high-horsepower applications on axes needing correction of up to 2° and 0.01-in. angular and parallel misalignment.

Diaphragm couplings — with typical maximum torques to 500,000 lb-in. at their largest — transmit power through a metal membrane (sometimes of varying thickness or ganged in arrays).

Though often more costly than other options, diaphragm couplings mitigate and avoid problematic transmission of forces and moments t coupled equipment such as bearings. Profiles include straight-spoked diaphragms; tapered diaphragms; and convoluted diaphragms assembled in arrays. These correct up to 1° and 0.1-in. angular and parallel misalignment.

Elastomeric tire couplings — with typical maximum torques to 550,000 lb-in. at their largest — transmit power through a tire-shaped rubber element that bridges the coupling’s two hubs. These correct up to 1° and 0.2-in. angular and parallel misalignment.



Jaw couplings — with typical maximum torques to 550,000 lb-in. at their largest — include both straight and curved variations. Much like disc couplings, the design lends itself to adaptation to both power transmission and backlash-free motion control. The coupling hubs have jaws that lock into a spider made of bronze, elastomer, or other material. Power transmission is reliable even through 1° and 0.01 in. angular and parallel misalignment.

Oldham couplings — with typical maximum torques to 550,000 in. at their largest — include a metal or polymer disc with slots on each face 90° offset. Usually hub fins or tenons engage a slotted disc that’s free to slide even while transmitting torque. Oldham couplings for accommodation of angular misalignment might transmit through 6° and 0.05 in. Oldham couplings to primarily address parallel misalignment might address 0.15 in. or more and 0.5° or so.

Disc couplings — with typical maximum torques to 5,000,000 lb-in. at their largest — are one of a few coupling types that come in variations to satisfy motion-control or power-transmission applications. Single thin discs or multi-disc packs (made of metal or engineered composite) bridge the hubs. In representative designs, the discs impart flexibility to transmit torque even while addressing up to 2° and 0.05 in. angular and parallel misalignment.

Grid couplings — with typical maximum torques to 5,000,000 lb-in. at their largest — include a heavy spring that weaves between slots on the coupling hubs. Compliant connection damps torsional vibration and shock loading — typically even through 0.3° and 0.30 in. angular and parallel misalignment.

Gear couplings — with typical maximum torques to 55,000,000 lb-in. at their largest — include a flexible joint on each hub. In most variations, a spindle joins the two. Each joint includes gearset that mates with a 1:1 ratio. The tooth flanks and external gearing’s outer diameter are crowned to allow rotating-spline action and accommodate misalignment of 3° and 0.04 to 0.4 in. on average.

Mechanical connection between two objects

This article is about a mechanical connection between two objects. For other uses, see Coupling (disambiguation)

An improvised flexible coupling made of car tyre pieces connects the drive shafts of an engine and a water pump. This one is used to cancel out misalignment and dampen vibrations. Rotating coupling

A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join two pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects.[1] Couplings do not normally allow disconnection of shafts during operation, however there are torque-limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.

Uses

[

edit

]

Shaft couplings are used in machinery for several purposes. A primary function is to transfer power from one end to another end (ex: motor transfer power to pump through coupling).

Other common uses:

• To alter the vibration characteristics of rotating units
• To connect the driving and the driven part
• To introduce protection
• To reduce the transmission of shock loads from one shaft to another
• To slip when overload occurs

Types

[

edit

]

Beam

[

edit

]

A beam coupling

A beam coupling, also known as helical coupling, is a flexible coupling for transmitting torque between two shafts while allowing for angular misalignment, parallel offset and even axial motion, of one shaft relative to the other. This design utilizes a single piece of material and becomes flexible by removal of material along a spiral path resulting in a curved flexible beam of helical shape. Since it is made from a single piece of material, the beam style coupling does not exhibit the backlash found in some multi-piece couplings. Another advantage of being an all machined coupling is the possibility to incorporate features into the final product while still keep the single piece integrity.

Changes to the lead of the helical beam provide changes to misalignment capabilities as well as other performance characteristics such as torque capacity and torsional stiffness. It is even possible to have multiple starts within the same helix.

The material used to manufacture the beam coupling also affects its performance and suitability for specific applications such as food, medical and aerospace. Materials are typically aluminum alloy and stainless steel, but they can also be made in acetal, maraging steel and titanium. The most common applications are attaching rotary encoders to shafts and motion control for robotics.

Beam couplings can be known by various names depending upon industry. These names include flexible coupling, flexible beam coupling, flexible shaft coupling, flexure, helical coupling, and shaft coupling.

The primary benefit to using a flexible beam coupling to join two rotating shafts is to reducing vibration and reaction loads which in turn will reduce overall wear and tear on machinery and prolong equipment life.

• A beam coupling with optional features machined into it

• Increasing number of coils allows for greater angular misalignment.

Bush pin flange

[

edit

]

Bush pin flange coupling is used for slightly imperfect alignment of the two shafts.

This is modified form of the protected type flange coupling. This type of coupling has pins and it works with coupling bolts. The rubber or leather bushes are used over the pins. The coupling has two halves dissimilar in construction. The pins are rigidly fastened by nuts to one of the flange and kept loose on the other flange. This coupling is used to connect shafts which have a small parallel misalignment, angular misalignment or axial misalignment. In this coupling the rubber bushing absorbs shocks and vibration during its operations. This type of coupling is mostly used to couple electric motors and machines.

Constant velocity

[

edit

]

There are various types of constant-velocity (CV) couplings: Rzeppa joint, Double cardan joint, and Thompson coupling.

Clamp or split-muff

[

edit

]

In this coupling, the muff or sleeve is made into two halves parts of the cast iron and they are joined by means of mild steel studs or bolts. The advantages of this coupling is that assembling or disassembling of the coupling is possible without changing the position of the shaft. This coupling is used for heavy power transmission at moderate speed.

Diaphragm

[

edit

]

Diaphragm couplings transmit torque from the outside diameter of a flexible plate to the inside diameter, across the spool or spacer piece, and then from inside to outside diameter. The deforming of a plate or series of plates from I.D. to O.D accomplishes the misalignment.

Disc

[

edit

]

Disc couplings transmit torque from a driving to a driven bolt tangentially on a common bolt circle. Torque is transmitted between the bolts through a series of thin, stainless steel discs assembled in a pack. Misalignment is accomplished by deforming of the material between the bolts.

Elastic

[

edit

]

An elastic coupling (for connecting a windsurfing sail rig to the board)

An elastic coupling transmits torque or other load by means of an elastic component. One example is the coupling used to join a windsurfing rig (sail, mast, and components) to the sailboard.[2] In windsurfing terminology it is usually called a "universal joint", but modern designs are usually based on a strong flexible material, and better technically described as an elastic coupling. They can be tendon or hourglass-shaped, and are constructed of a strong and durable elastic material. In this application, the coupling does not transmit torque, but instead transmits sail-power to the board, creating thrust (some portion of sail-power is also transmitted through the rider's body).[citation needed]

Flexible

[

edit

]

Flexible couplings are usually used to transmit torque from one shaft to another when the two shafts are slightly misaligned. They can accommodate varying degrees of misalignment up to 1.5° and some parallel misalignment. They can also be used for vibration damping or noise reduction. In rotating shaft applications a flexible coupling can protect the driving and driven shaft components (such as bearings) from the harmful effects of conditions such as misaligned shafts, vibration, shock loads, and thermal expansion of the shafts or other components.

At first, flexible couplings separate into two essential groups, metallic and elastomeric. Metallic types utilize freely fitted parts that roll or slide against one another or, on the other hand, non-moving parts that bend to take up misalignment. Elastomeric types, then again, gain flexibility from resilient, non-moving, elastic or plastic elements transmitting torque between metallic hubs.

Fluid

[

edit

]

Gear

[

edit

]

A gear coupling

A gear coupling is a mechanical device for transmitting torque between two shafts that are not collinear. It consists of a flexible joint fixed to each shaft. The two joints are connected by a third shaft, called the spindle.

Each joint consists of a 1:1 gear ratio internal/external gear pair. The tooth flanks and outer diameter of the external gear are crowned to allow for angular displacement between the two gears. Mechanically, the gears are equivalent to rotating splines with modified profiles. They are called gears because of the relatively large size of the teeth.

Gear couplings and universal joints are used in similar applications. Gear couplings have higher torque densities than universal joints designed to fit a given space while universal joints induce lower vibrations. The limit on torque density in universal joints is due to the limited cross sections of the cross and yoke. The gear teeth in a gear coupling have high backlash to allow for angular misalignment. The excess backlash can contribute to vibration.[citation needed]

Gear couplings are generally limited to angular misalignments, i.e., the angle of the spindle relative to the axes of the connected shafts, of 4–5°.[citation needed] Universal joints are capable of higher misalignments.

Single joint gear couplings are also used to connect two nominally coaxial shafts. In this application the device is called a gear-type flexible, or flexible coupling. The single joint allows for minor misalignments such as installation errors and changes in shaft alignment due to operating conditions. These types of gear couplings are generally limited to angular misalignments of 1/4–1/2°.[citation needed]

Geislinger

[

edit

]

Giubo

[

edit

]

The company is the world’s best colored o rings supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Grid

[

edit

]

A grid coupling is composed of two shaft hubs, a metallic grid spring, and a split cover kit. Torque is transmitted between the two coupling shaft hubs through the metallic grid spring element.

Like metallic gear and disc couplings, grid couplings have a high torque density. A benefit of grid couplings, over either gear or disc couplings, is the ability their grid coupling spring elements have to absorb and spread peak load impact energy over time. This reduces the magnitude of peak loads and offers some vibration dampening capability. A negative of the grid coupling design is that it generally is very limited in its ability to accommodate the misalignment.[3]

Highly flexible

[

edit

]

Highly flexible coupling

Highly flexible couplings are installed when resonance or torsional vibration might be an issue, since they are designed to eliminate torsional vibration problems and to balance out shock impacts.

They are used in installations where the systems require a high level of torsional flexibility and misalignment capacity. This type of coupling provides an effective damping of torsional vibrations, and high displacement capacity, which protects the drive. The design of the highly flexible elastic couplings makes assembly easier. These couplings also compensate shaft displacements (radial, axial and angular) and the torque is transmitted in shear.[4] Depending on the size and stiffness of the coupling, the flexible part may be single- or multi-row.[5]

Hirth joints

[

edit

]

Hirth joints use tapered teeth on two shaft ends meshed together to transmit torque.

Hydrodynamic

[

edit

]

Jaw

[

edit

]

Jaw coupling is also known as spider or Lovejoy coupling.

Magnetic

[

edit

]

A magnetic coupling uses magnetic forces to transmit the power from one shaft to another without any contact. This allows for full medium separation. It can provide the ability to hermetically separate two areas whilst continuing to transmit mechanical power from one to the other making these couplings ideal for applications where prevention of cross-contamination is essential.

Oldham

[

edit

]

Animated Oldham coupler

An Oldham coupling has three discs, one coupled to the input, one coupled to the output, and a middle disc that is joined to the first two by tongue and groove. The tongue and groove on one side is perpendicular to the tongue and groove on the other. The middle disc rotates around its center at the same speed as the input and output shafts. Its center traces a circular orbit, twice per rotation, around the midpoint between input and output shafts. Often springs are used to reduce backlash of the mechanism. An advantage to this type of coupling, as compared to two universal joints, is its compact size. The coupler is named for John Oldham who invented it in Ireland, in 1821, to solve a problem in a paddle steamer design.

• Oldham coupler, assembled

• Oldham coupler, disassembled

Rag joint

[

edit

]

Rag joints are commonly used on automotive steering linkages and drive trains. When used on a drive train they are sometimes known as giubos.

Rigid

[

edit

]

Rigid couplings are used when precise shaft alignment is required; any shaft misalignment will affect the coupling's performance as well as its life span, because rigid couplings do not have the ability to compensate for misalignment. Due to this, their application is limited, and they're typically used in applications involving vertical drivers.

Clamped or compression rigid couplings come in two parts and fit together around the shafts to form a sleeve. They offer more flexibility than sleeved models, and can be used on shafts that are fixed in place. They generally are large enough so that screws can pass all the way through the coupling and into the second half to ensure a secure hold. Flanged rigid couplings are designed for heavy loads or industrial equipment. They consist of short sleeves surrounded by a perpendicular flange. One coupling is placed on each shaft so the two flanges line up face to face. A series of screws or bolts can then be installed in the flanges to hold them together. Because of their size and durability, flanged units can be used to bring shafts into alignment before they are joined.

Schmidt

[

edit

]

Sleeve, box, or muff

[

edit

]

A sleeve coupling consists of a pipe whose bore is finished to the required tolerance based on the shaft size. Based on the usage of the coupling a keyway is made in the bore in order to transmit the torque by means of the key. Two threaded holes are provided in order to lock the coupling in position.

Sleeve couplings are also known as box couplings. In this case shaft ends are coupled together and abutted against each other which are enveloped by muff or sleeve.

A gib head sunk keys hold the two shafts and sleeve together (this is the simplest type of the coupling) It is made from the cast iron and very simple to design and manufacture. It consists of a hollow pipe whose inner diameter is same as diameter of the shafts. The hollow pipe is fitted over a two or more ends of the shafts with the help of the taper sunk key. A key and sleeve are useful to transmit power from one shaft to another shaft.

Tapered shaft lock

[

edit

]

A tapered lock is a form of keyless shaft locking device[6] that does not require any material to be removed from the shaft. The basic idea is similar to a clamp coupling but the moment of rotation is closer to the center of the shaft.[7] An alternative coupling device to the traditional parallel key, the tapered lock removes the possibility of play due to worn keyways.[8][9][10] It is more robust than using a key because maintenance only requires one tool and the self-centering balanced rotation means it lasts longer than a keyed joint would, but the downside is that it costs more.[11]

Twin spring

[

edit

]

A flexible coupling made from two counter-wound springs with a ball bearing in the center, which allows torque transfer from input to output shaft. Requires no lubrication to consistently run as it has no internal components.[12]

Universal joint

[

edit

]

Maintenance and failure

[

edit

]

Coupling maintenance requires a regularly scheduled inspection of each coupling. It consists of:

• Performing visual inspections
• Checking for signs of wear or fatigue
• Cleaning couplings regularly
• Checking and changing lubricant regularly if the coupling is lubricated. This maintenance is required annually for most couplings and more frequently for couplings in adverse environments or in demanding operating conditions.
• Documenting the maintenance performed on each coupling, along with the date.[13]

Even with proper maintenance, however, couplings can fail. Underlying reasons for failure, other than maintenance, include:

• Improper installation
• Poor coupling selection
• Operation beyond design capabilities.[13]

External signs that indicate potential coupling failure include:

• Abnormal noise, such as screeching, squealing or chattering
• Excessive vibration or wobble
• Failed seals indicated by lubricant leakage or contamination.[13]

Balance

[

edit

]

Couplings are normally balanced at the factory prior to being shipped, but they occasionally go out of balance in operation. Balancing can be difficult and expensive, and is normally done only when operating tolerances are such that the effort and the expense are justified. The amount of coupling unbalance that can be tolerated by any system is dictated by the characteristics of the specific connected machines and can be determined by detailed analysis or experience.[13]

See also

[

edit

]

References

[

edit

]

If you want to learn more, please visit our website wholesale o rings.