If your goal is to produce straight-edged wall panels with low production costs, FaMe magnet shuttering provides the means. It is easy to attach and to remove from table surfaces. There is no need for welding, bolting or grinding, so your table surfaces will remain in good condition. And with the same frame system you can handle most wall thicknesses, from 70 &#; 500 mm, with accessories even up to 800 mm.
With competitive price and timely delivery, Horizon sincerely hope to be your supplier and partner.
Steel and wood are commonly used as side forms in wall panel production &#; both of which have some downsides: steel is heavy and wood is thrown away after usage. With aluminum side profiles, you can save by decreasing the amount of waste wood. Aluminum is a recyclable material and you can cast directly on it.
If you cast with wooden profiles, it&#;s likely that the panels don&#;t come out as straight as they could because of the challenges with wood and water. It is hard to adjust wet wood side forms straight and in 90˚ corner. If you try to adjust them by hammering the magnet, it&#;s a health risk for both, the employee and the magnet.
The magnets and side forms are extremely easy and safe to use compared to other shuttering systems. The push-button and the housing of the magnet have been designed to give cover against any injuries when following the user instructions. The magnets&#; green color works as an attention color at the factory hall. The aluminum side forms can be lifted without cranes; they are safe and light to lift with manpower. That helps to avoid bottlenecks in production.
The FaMe magnet shuttering system makes it easy to prepare the edges and window or door openings on tables or battery molds. You just put the side forms to the desired places and attach them to the mold with push-button magnets. The magnets can be moved easily by sliding them on the surface before pushing the button for attachment. The magnets can be placed wherever you want, because of the patented and compatible jaw groove of the side forms and the magnets.
To remove the magnets, there&#;s a releasing tool that you just attach to the magnet, then push the handle and remove the magnet from the mold. If you are new to using magnets and side forms in your wall production, we will guide you on the best working methods.
The magnets and side forms need maintenance just like any other machine. When kept in good shape and used as advised, the magnets will last for over a decade. What you should do is to always clean them after usage. Also, while oiling the molds, reserve some for the magnets as well for easier cleaning. The magnets can also be repaired if needed, spare parts are always in stock and ready for quick deliveries.
For more information, please visit Formworks Button Magnet.
With FaMe magnet shuttering, you will have consistent quality of wall panels, safer working methods, and you will need to use less wood. You will save in production costs, your factory personnel will have safer equipment to use and you&#;ll have satisfied customers who appreciate the straight wall panels!
Form to be rendered here.
This type of magnetic filter is especially designed for the high hygienic requirements of the food and pharmaceutical industries. The products to be transported are usually liquids or powders with a risk of bacterial growth.
Suited for pressures up to 10 bar and temperatures up to 140 °C.
We can calculate the precise pressure drop with these filters in your situation for gaseous or liquid products using our FEM software. The pressure drop depends on the physical properties of your product flow (viscosity) and its speed. Please contact us about this.
For more Magnetic Steel Triangle Chamfer Factoryinformation, please contact us. We will provide professional answers.